PRIMERS AND FILLERS

<< Back to Product page

COLOMIX 5:1 HS EASY SAND PRIMER FILLER

Use :

It can be applied in thin film as a Primer or at higher film thickness as a Primer Filler
Very good sanding properties
Good anticorrosion properties
Colour: grey, white and black
VOC compliant

PACKAGING:

0.75 l
2.5 l

COLOMIX 5:1 2K ACRYL HARDENER STANDARD
25 - 30% COLOMIX 2K UNIVERSAL ACRYLIC THINNER

100 g COLOMIX 5:1 HS EASY SAND PRIMER FILLER
11 g COLOMIX 5:1 2K ACRYL HARDENER STANDARD
18-21 g COLOMIX 2K UNIVERSAL ACRYLIC THINNER

1 - 1.5 h

22 - 25 s
DIN 53211 Ф4 mm/20°C

1.6 - 1.8 mm
2 - 2.5 bar

2-3 layers
150 - 200 µm

10 - 15 min/20˚C between layers
15 - 20 min/20˚C before drying in oven

20 °C = 2 - 3 h
60 °C = 30 min

15 - 20 min
Distance to the object: 70 - 80 cm

P360 - P600

P600 - P1200

COLOMIX BASISLACK

2 years

2004/42/II B(c) (540) 530
EU limit value VOC for this type of products (category II B (c)) in the form, which is ready for application is 540 g/l VOC of this product, prepared for use is 530 g/l

<< Back to Product page

COLOMIX ANTICORROSIVE PRIMER

Use :

One-component alkyd primer provides good anti-corrosion protection.
Easy application and quick drying (20-25 min at 20 °C)
No sanding required
Colour: white, black, grey

PACKAGING:

0.75 kg

25 - 35%

NITRO THINNER

22 - 25 s
DIN 53211 Ф4 mm/20°C

1.3 mm
2 - 2.5 bar

2 layers
20 - 30 μm µm

5 min/20˚C between layers
5 min/20˚C before drying in oven

20 °C = 20 - 25 min

2 years

<< Back to Product page

COLOMIX 1:1 EPOXY PRIMER

Use :

For anti-corrosion protection of steel, galvanized sheet surfaces and aluminium
It is used for a temporary which requires a high chemical and mechanical resistance
It enables the application of the top coating according to the “wet on wet” system
Combined with an adequate top coating, it is suitable for exposure in an industrial or marine atmosphere
Colour: grey
VOC compliant

PACKAGING:

1.0 l

COLOMIX 1:1 2K EPOXY HARDENER

100 g COLOMIX 1:1 EPOXY PRIMER
57 g COLOMIX 1:1 2K EPOXY HARDENER

8 h

21 - 24 s
DIN 53211 Ф4 mm/20°C

1.5 - 1.7 mm
2 - 2.5 bar

2 layers
60 - 80 µm

Thinner is not needed

5 - 10 min/20˚C between layers
5 - 10 min/20˚C before drying in oven

20 °C = 45 min

COLOMIX BASISLACK

2 years

2004/42/II B(c) (540) 470
EU limit value VOC for this type of products (category II B (c)) in the form, which is ready for application is 540 g/l VOC of this product, prepared for use is 470 g/l

<< Back to Product page

COLOMIX PRIMER FOR PLASTICS

Use :

1K Primer for use in 3-stage plastic painting system
Adhesion to all exterior original OEM plastic car parts
Not for painting of polyethylene!
Ready for spraying
Very fast drying
Overcoat with COLOMIX 2K FILLERS or COLOMIX BASISLACK
Colour: Colourless with spraying control pigment
VOC compliant

PACKAGING:

0.5 l

Ready for spraying

1.2 - 1.3 mm
1 - 1.5 bar

1 layer
3 - 5 µm

20 °C = 10 min

18 months

2004/42/II B(e) (840) 800
EU limit value VOC for this type of products (category II B (e)) in the form, which is ready for application is 840 g/l VOC of this product, prepared for use is 800 g/l

<< Back to Product page

COLOMIX BUMPER PAINT

Use :

Fast drying textured coat suitable for the repair of bumpers and other plastic parts
Original OEM plastic parts
Used to restore original structure on bumpers or to build new structure on flat plastic parts
Maximum resistance against chemical and mechanical strains and weathering
Can be applied without primer direct on plastic
Colour: black
VOC compliant

PACKAGING:

1.0 l

30 s
DIN 53211 Ф4 mm/20°C

COLOMIX 2K UNIVERSAL ACRYL THINNER 10%

1.6 - 1.8 mm
2 - 3 bar

2 layers
40 - 50 µm

3 min (on small surface, on big surface without flash-off)

20 °C = 12 - 15 min

2 years

2004/42/II B(e) (840) 550
EU limit value VOC for this type of products (category II B (e)) in the form, which is ready for application is 840 g/l VOC of this product, prepared for use is 550 g/l

<< Back to Product page

COLOMIX ANTIGRAVEL

Use :

One component coating based on modified robbers
For protection of sills and wheel arches against stone chipping
It is resistant to salt, humidity, oil and benzine
Possibility of over-coating immediately after drying
Colour: grey, black and white
VOC compliant

PACKAGING:

1.0 kg

40x

3 - 4 bar
2 - 3 layers

min. 15 °C

5 - 10 min/20˚C

20 °C = 60 -90 min
60 °C = 30 min

2 years

2004/42/II B(e) (840) 400
EU limit value VOC for this type of products (category II B (e)) in the form, which is ready for application is 840 g/l VOC of this product, prepared for use is 400 g/l

COLOMIX 5:1 HS EASY SAND PRIMER FILLER

Use :

PACKAGING:

COLOMIX ANTICORROSIVE PRIMER

Use :

PACKAGING:

COLOMIX 1:1 EPOXY PRIMER

Use :

PACKAGING:

COLOMIX PRIMER FOR PLASTICS

Use :

PACKAGING:

COLOMIX BUMPER PAINT

Use :

PACKAGING:

COLOMIX ANTIGRAVEL

Use :

PACKAGING:

What is bodyshop recommended price?